Brand new R320 stuck in "firmware init" for 30 min.
Idrac7 Firmware Version = 1.40.40
Bios 1.5.2
Work arounds that did work for me. But for how long ?
1)
disable/enable "LifecycleController.LCAttributes.CollectSystemInventoryOnRestart"
idracadm7 set LifecycleController.LCAttributes.CollectSystemInventoryOnRestart disabled
reboot
idracadm7 set LifecycleController.LCAttributes.CollectSystemInventoryOnRestart enabled
reboot
2)
Reinstall idrac firmware 1.40.40