Re: Direct access to download files
ftp://ftp.us.dell.comThis is the Dell FTP site that stores Dell update packages for all devices we support. Just browse to a folder for a device(Example: BIOS) and look for your platform type. You can...
View ArticleRe: iDRAC update in stages
Recently I located and posted most iDRAC6 releases on the following site: en.community.dell.com/.../4594.lifecycle-controller-1.aspxThese direct links were obtained from ftp.dell.com.thx,steve
View ArticleRe: PowerEdge R520, Windows Server 2012, RAID Partitions
From Systems Build Update Utility deploying the OS, the RAID configured will be treated as an entire single partition. Systems Build Update Utility does not give an option to create multiple...
View ArticleRe: OMSA 7.2 Tomcat version
I've also ran into this, Security team has uncovered this as an issue with Apache2 not tomcat.I've ran through the steps listed above and this is still showing a vulnerability with Apache2This is part...
View ArticleRe: OMSA 7.2 Tomcat version
I'm not sure if this version of Apache was installed with previous version of OMSA. I have disabled the service, I am still able to see the server in OMSA and OME. I have validated that the server is...
View ArticleRe: iDRAC6 / Lifecycle Controller error on new PER710
We have an R710 server that also has the same iDRAC6 not responding and also reports the Inventory failure message (whilst attempting to update from Linux Centos6.4).Was there ever a way past this...
View ArticleRE: iDRAC6 error
@Sean / Brian - We have a Dell R710 that is unable to detect DRAC6 at start up and reboots. There was no DRAC6 board in the system so I bought one and installed it but the message remains the same.I...
View ArticleRE: iDRAC6 error
I've read that you may want to downgrade your BIOS to get the firmware update to flash. I was lucky and the integrated iDRAC I purchased already had the new firmware.
View ArticleRe: iDRAC6 / Lifecycle Controller error on new PER710
R710tci -When iDRAC is in a failed state, System Services will report disabled during POST and you will not have access to CTRL-E iDRAC settings menu. Plus you will be prompted with the error message...
View ArticleRe: iDRAC6 / Lifecycle Controller error on new PER710
Component Software -When iDRAC is in a failed state, System Services will report disabled during POST and you will not have access to CTRL-E iDRAC settings menu. You will also be prompted for an iDRAC...
View ArticleRe: Looking For Switches For A Server Build - SysCfg and RacAdm
CptSternn -The only attribute you listed that can be settable using RACADM is "System.LCD.Configuration" which you can set to "Ambient Temperature". I noticed you are wanting to set 30+ attributes...
View ArticleRe: hard disk failure notification via email
The DRAC console PEF filter list does not include the hard drives. How do we add them?
View ArticleRe: OMSA 7.2 Tomcat version
Hi,OMSA 7.3 has been released and has Tomcat 7.0.39. Installing The latest OMSA will solve Most of the Vulnerabilities reported.
View ArticleDMPVV non-compliant server status
In regards to the Dell Management for vCenter plugin v1.6, I am seeing non-compliant status for all the ESXi hosts (M710HD blades). Both CSIOR status is Not Enabled and OMSA as Not Configured. I can...
View ArticleClient System Update - Cache request
Feature Request for Dell Client System Update to cache the downloads until install successful. I just ran Dell Client System Update and it downloaded over 700 meg in downloads, it took a while. It...
View ArticleCreate multiple virtual disks with WSMAN
From the RAID controller I can create multiple virtual disks but only one via WSMAN. What is the super-secret special command to execute a set configuration via one command?Currently I use two XML...
View ArticleRe: Create multiple virtual disks with WSMAN
duckman9-We don't support one command that can create multiple VDs once invoked or can call 2 xmls. This is the workflow process to create multiple VDs using WSMAN:1. Edit the xml that...
View ArticleRe: Create multiple virtual disks with WSMAN
So I currently have a script that does the following:1. Reset Config2. Create 30G Virtual disk (over 12 drive RAID6)3. Configure job4. Watch #3 until complete, when complete continue5. Create 5TB...
View ArticleRe: Create multiple virtual disks with WSMAN
Can you give me the WSMAN error being returned when you try to create the 2nd VD? This will help in troubleshooting why the creation of the 2nd VD is failing.Also, what version of iDRAC firmware do you...
View Article