MD1000 array not seen by OMSA
Hi List.We have a R410 with a H810 controller which is connected to a MD1000 with 2 raid6 arrays.Additionally the R410 has SAS6/iR controller connected to the backplane.When I login to OMSA on...
View ArticleRe: Announcement : Dell OpenManage Server Administrator – OMSA v 7.3 is...
hellocan i use the poweredge 2900 to install win server 2012 ?is openmanage 730 support poweredge 2900 ?
View ArticleRe: Announcement : Dell OpenManage Server Administrator – OMSA v 7.3 is...
Absolutely you can, please seeDell Systems Management - OpenManage Software SupportMatrix Version 7.3 You may want to bookmark dell.com/openmanagemanualsBestVish
View ArticleRe: Announcement : Dell OpenManage Server Administrator – OMSA v 7.3 is...
Dell Systems Management - OpenManage Software SupportMatrix Version 7.3 - ftp.dell.com/.../dell-opnmang-sw-v7.3_Reference%20Guide5_en-us.pdf
View ArticleRe: Announcement : Dell OpenManage Server Administrator – OMSA v 7.3 is...
Yes, it is supported. You can refer "Dell Systems Management - OpenManage Software SupportMatrix Version 7.3 " which is available here :...
View Articlem1000e/m600 - blade will not upgrade past idrac 1.65
Firstly, I'm new to blades from pizza boxes.We just installed an m1000e with 6 x m600 blades.I upgraded the cmc to 4.4. I was able to upgrade the idrac6 from 1.55 to 1.65. Unless I'm reading the...
View ArticleRe: m1000e/m600 - blade will not upgrade past idrac 1.65
Hi Mark, iDRAC firmware version will defer from generation to generation. For 10G Modular server, latest iDRAC firmware is 1.65. 10G Modular servers include M600, M605, M805 and M905....
View ArticleRe: m1000e/m600 - blade will not upgrade past idrac 1.65
Shine - thanks for the very detailed answer!How about Lifecycle Controllers for the m600?
View ArticleRe: m1000e/m600 - blade will not upgrade past idrac 1.65
M600 does not support Life Cycle Controller. LC support is started from 11G Servers.
View ArticleRe: m1000e/m600 - blade will not upgrade past idrac 1.65
ok, got it.How about the f10 system tools. It's reporting that the system tools are not installed. Can I download the SMTD or SBUU? Which is easier?
View ArticleRe: Dell Plugin - vCenter Role Errors
Try unregistering then re-registering the plug-in. That sometimes addresses this issue.
View ArticleRe: Dell Plugin - vCenter Role Errors
Using the vcenter admin user in the plugin fixed the issue. The user I was using did not have enough permissions.Many thanks,Benjamin
View ArticleOMSA 7.3 upgrade
Hi, I have OMSA 7.1 installed on a number of ESXi 5.0U1 hosts which I installed using VUM. Do I have to remove the existing VIB prior to installing 7.3 or do I just install on top using VUM? Thx
View ArticleBetreff: OMSA 7.3 upgrade
You dont habe to deinstall the old version. But it have seen that after adding the new version to a existing baseline a scan doesnt recognize the new version.To make your life easier add...
View Articleracadm command help please for power setting
On an R720 I am trying to change the power setting through the drac via ssh.I can get the setting but my syntax is wroong in tring to set the setting.Here is my get:/admin1-> racadm get...
View ArticleRe: racadm command help please for power setting
Cameron, Before setting "ProcPwrPerf" you need to make sure 'SysProfileSettings.SysProfile' object is set to 'Custom'. Check below command for details racadm help...
View ArticleRe: racadm command help please for power setting
Thank you Shine!I will also be modifying a few other settings via racadm commands such as BIOS.SysProfileSettings.ProcCStates and BIOS.SysProfileSettings.ProcC1E. Will that single jobqueue command...
View ArticleRe: racadm command help please for power setting
Yes. One single jobqueue command can be used for applying all setting for BIOS. This is depend on device. E.g. if you want to configure NIC attribute then you need to create a seperare job for NIC.
View ArticleRe: racadm command help please for power setting
Excellent!One more thing. Can I make the changes, set the job and then let it sit in that state for a few days before the reboot?Also if I need to do I BIOS update as well can that be done at the same...
View ArticleFirmware version weirdness OMSA vs OME
I have an R310 that had OMSA 7.2 that I just upgraded to OMSA 7.3Now the server is showing it needs a PERC controller firmware upgrade that is higher than the available listed on the firmware dowanlods...
View Article